9M Anchor Lock assembly with the single claw anchor in the open position. Notice the multiple hole locations on the base plate for ease of connection to form.
9M Anchor Lock utilizes two types of tie systems. 1" dia taper ties, with multiple slots (wall sizes) available, and she bolts using 1/2" NC thread inner ties. Neoprene water stops are available on the inner ties if required.
16' x 24' 9M Anchor Lock gangs, featuring dimensional lumber horizontally, and LVL lumber vertically.
Gates custom built 9M Anchor Lock forms for a 24' tall highway retaining. Features a haunch at top with form liner. Gates built 8'x24' forms to transport to job in Idaho, and then two forms were bolted together on site so the contractor could swing 16'x24' forms.
9M Anchor Lock gang 18' tall featuring both horizontal and vertical LVL lumber. Note: Pin N Lock OS corners at the ends of the gangs.
9M Anchor Lock gang with a haunch built into the form. Architectural finish and adaptability of the wood form are two of the strong suits of Gates wood gangs.
A large 9M Anchor Lock job braced and staged ready for concrete.
14'X16' 9M Anchor Lock gang at the beginning step of assembly.
14'x16' 9M Anchor Lock gang at intermediate step on jig table.
14'x16' Job built 9M Anchor Lock gang, ready for attachment of hardware. 9M lock, 2x2 angles, PU loops and staging.
Specialty column form. Features 9M Anchor Lock and taper ties. Full liquid head.Gates designed, job built by contractor.
Manufacturer: Gates and Sons, Inc.
For More Information on the 9 Anchor Lock, [Click Here]
to Link to Manufacturer Web Site